CU connecting joint press line

Basic Info

Model No.ZT-009

Brandzhongtuo

Shaft Diameter40mm

Punching Holes SystemHydraulic Punching Holes System

Cutting SystemFly Saw Non Stopping Cutting System

TransportBy Gear

CutterGcr12

Cutting Tolerance1mm

Roller MaterialGCr12Mov Quenching Treatment

Shaft Material40Cr Steel

Working Speed0-45m/min

Additional Info

Packagingas customer's need

Productivity50 m/min

TransportationOcean,Land,as customer requirem

Place of Origincangzhou

Supply Ability50 sets/month

CertificateCE, ISO, SGS, IAF,CNAS

HS Code8455221000

Payment TypeL/C,T/T,D/P,Western Union,D/A

IncotermFOB,CFR,CIF,FCA

Product Description

CU connecting joint press line 

This CU connecting joint press line  can produce the accessory of the ceiling system and drywall system..

CU connecting joint press line

There are two production lines:

1        The production for the part smaller than 350mm,

1.1details as below:

For the two smaller sizes (the smaller sizes (smaller than 350mm) cannot be made by the machine one, because mold cannot work as such smaller.)

   1.2 Horizontal feeding and punching.

1.3 Machine work flow: De-coiler-Feeding-servo feeder Press machine Horizontal-cutting

   1.4 Press machine is 63 tons

   1.5 It need one mold for the two smaller one.

   1.6 The feeding raw material width is same with the part.


CU connecting joint press line



1        The production for the part bigger than 350mm,

2.1  For bigger size one (same with the bigger samples or much bigger than the samples you sent , bigger than 350mm, any sizes it can make )

Lengthways feeding and punching:

2.2  Work flow: De-coiler-feeding-servo feeder- 40 ton press machine-25 ton press machine-receiving

2.3 The press 40 tons press machine punching the two side holes and cutting. The 25 tons press machine punch the middle part.

2.4  This machine, it need two sets mold, one set mold for one press machine.

2.5  It Can make bigger sizes than the sample you sent to us. Can controlled by the PLC.

2.6  The feeding raw material width is :30mm

Technical process:

De-coiler–Leveling–servo feeding–punching-receiving


3.1. 3 tons manual de-coiler


 specifications of the 3 tons manual de-coiler

Usage: It is used to support the steel coil and uncoil it in a turntable way.

Passive uncoil pulled by roll forming system

1: Coil inner diameter:    450-550mm  

2: Coil max width:      600mm      
3:Max carrying capacity:   3000kg

◆It is controlled by servo electromotor and used to regulate for high speed feed and precise length control

◆The operation is done at the control table with programmable control.

◆Five roller straightening system: 2 roller configuration

◆Roller handling process: Raw material tempering-rough process-Hardened HRC55-60-finish machining

◆Achieve the hydraulic necessary of the whole production line.

CU connecting joint press line


CU connecting joint press line


CU connecting joint press line


CU connecting joint press line


CU connecting joint press line

Warranty and Training


2. Delivery time: 45 working days after receiving 30% down payment

3. Payment term: T/T 30% as advance and 70% before shipment

4. Guarantee: 1 year quality guarantee and lifelong service guarantee

5. Installation: If need the seller will send the engineers to do the installation. One engineers totally. And the buyer should cover the round tickets and accommodation for engineer. And the buyer should pay USD 80 for each person per day. Whole line needs around 7 days.

7. Documents: The seller will provide below documents with the machine: the electrical scheme, hydraulic scheme, the complete operation instruction.





additions

If you sample is with the perforated holes or the mesh on the profile, then it need the press punching system. The there is a hydraulic tracking cutting system at the end of the Roll Forming Machine body. The cutting can be designed as the high speed one and the normal speed one. Also there can be designed a logo punching system together with the cutting system, it can be name the non stopping punching and cutting system.

Product Categories : C/U/ Channel & T Bar Roll Forming Machine > Drywall Profile Roll Forming Machine

Product Images

  • CU connecting joint press line
  • CU connecting joint press line
  • CU connecting joint press line
  • CU connecting joint press line
  • CU connecting joint press line
Email to this supplier
  • *Subject:
  • *Messages:
    Your message must be between 20-8000 characters