950 Aluminum Step Tile Roof Cladding Sheet Roll Forming Machine
This 950 aluminium roll former is manufacturing corrugated step tiles roofing sheets with a high speed. This aluminum rollformer consists of decoiler, sheet guiding equipment, corrugating machine, pressing equipment, cutter, supporter, hydraulic system, control system. This step tiles corrugating machine is making the flat aluminium sheets into corrugated stepped tile roof sheets. The finished step-tile roofing sheets made by this aluminum corrugation machine can be widely used in garden factory, resort, pavilions, hotel and villa, exhibition hall, vacationland.
Technical Parameters of 950 Aluminium Step Tile Roofing Sheet Corrugation Machine
1. Material Spec: Q235; Thickness: 0.4 mm to 0.6 mm
2. Hydraulic decoiler Max. Capacity: 5000kgs
3. Controlling system: PLC
4. Main machine power: 7.5kw;
Hydraulic station power: 5.5kw
5. Step length: 150-400mm
Step height: 14mm
6. Working speed: 3-5m/min
7. Type of cutting: Roll-formed and length-set cutting
8. Power: 380V/3pH/50Hz or at the buyer′s requirement
| No | Item | Parameter |
| 1 | Suitable Material | Type | Pre-painted or galvanized metal sheet |
| Width(mm) | 1200 |
| Thickness(mm) | 0.4-0.7 |
| Yield stress | 220-280 MPA |
| 2 | Product Specifications | Cover Width | 950 |
| Length | Any length |
| 3 | Power Requirement | Type | 380V/3PH/50HZ |
| Main motor power(KW) | 5.5 |
| Cutting power(KW) | 5.5 |
| 4 | Forming Speed | 20 |
| 5 | Decoiler | Max. capacity | 5 T |
| Suitable coil OD(mm) | 1200 |
| Suitable coil ID(mm) | 450-550 |
| Max Coil width(mm) | 1250 |
| 6 | Forming Stand | 15 |
| 7 | Forming Shaft Diameter(mm) | 76 |
| 8 | Type of Cutting | Roll-formed and length-set cutting |
| 9 | Control System | Delta or Siemens PLC and inverter |
| 10 | Supporter | 3 m X 2 |
| 11 | Installation Dimension(m) | 15 X 3.5 |
| 12 | Total Weight(T) | 9.2 |
Technical flow:
Photoes of every parts of the 950 Aluminium Step Tile Roofing Sheet Corrugation Machine
Paking and shipping :
Product Categories : Roofing Sheet Roll Forming Machine > Glazed Tile and Ridge Cap Roll Forming
