Low cost safety interior roller shutter doors rolling machine
As shutter panels are more and more popular, it is widely used in the shop, hotel , bank etc building, Because it is easy open and closed , Also very easy to install, For fit this market, we manufactured the Shutter Door Roll Forming Machine.
Now there are many customer wants to try the market and invest on this project, but they do not want to invest too much money on it but has high requirements of the the finished products to cater market. Based on the needs, we developed Low cost safety interior roller shutter doors rolling machine. Take a random drawing profile for your reference:
Low cost safety interior roller shutter doors rolling machine features:
1. Main features that it costs around 6000 USD and then you can get one high quality machine.
2. We take the batch processing technology, we can save the cost of the molds.
3.For the motor design, we use smaller but it can give power.
4. For the transmission, we use the best chain instead of gear and gearbox.
5.For the roller processing, we use CNC, to make sure the 100% accuracy.
Here are some machine pictures for your reference:
Because the material for the shutter door sheet is metal, So when we closed the shutter door sheet, there is no lighting can pass by the shutter door sheet, in the house is very dark, for this we added one more punching machine between the deocoiler with the shutter door Roll Forming Machine , let the punching machine punch the holes in the sheet then formed by our shutter door roll forming machine to shutter door sheet. By the way, the shutter door panel will have good effect of ventilating effect. Here are some finished product pictures for your reference.
Low cost safety interior roller shutter doors rolling machine parameters for your reference:
| Description | Introduction | Note |
| Working efficiency with punching | 25 m/min | Adjustable by customer |
| Thickness of Material | 1.0 mm | |
| Control system | PLC | Delta |
| Uncoiler system | 3 Ton manual expansion | |
| Forming by rolling | Roll 12 Roller station | |
| Roller material | Gcr12MoV quenched | |
| Shaft and the diameter of axle | 45#Aluminium processing diameter of axle=￠50mm |
| Main part power | 5.5kw | |
| Hydraulic motor power | 3kw | |
| Hydraulic pressure | 20Mpa | |
| Scissor material | Gcr12MoV quenched | |
| length tolerance | ±1.0mm | |
| voltage | 380V, 50HZ,3 phase | Adjustable by customer |
| Driving Method | chain | |
For the rolling shutter door machine, if you want to know more information, please contact us at any time.
Product Categories : Roller Shutter Door Forming Machine
