Automatic metal slitting production line, slit metal equipments
1. Supported material:
| Material | Low carbon and alloy steel strip (σs≤350MPa.b≤500MPa ) |
| Thickness | 1.6-5.0mm |
| Coil width | 800-1600mm |
| Inner diameter of coil | Φ550-Φ650mm |
| Max out diameter | Φ1800mm |
| Max Loading Capacity | 20T |
| Working speed | 20-80m/min |
| Input Power | 380Volt, 3 phase, 4 lines, 50Hz. |
| Feeding Direction | right to left side |
| Machine system | mechanical, electrical and hydraulic control system |
| Slitting capacity | 1,50 mm-- 18 cut 2,00 mm-- 13 cut 3,00 mm-- 9 cut 4,00 mm-- 7 cut 5 mm-- 5 cut 6 mm --4 cut |
| Basic elements of this slitting line |
| 1 | Storage rack |
| 2 | Decoiler |
| 3 | Loading car |
| 4 | Shovel board device |
| 5 | Pinch & Flattener |
| 6 | Shear the ends |
| 7 | Steering guide system |
| 8 | Disc shearing system |
| 9 | Two side recoiler with loading car |
| 10 | Hydraulic equipment |
| 11 | Electric control |
2. Working flow: Decoiler with loading car→ shovel board device→ Centering device→ Flattening→ Centering device→ Shear the ends →Centering device→ Disc shear→ Two side recoiled → Accumulator →Locating expanding set→ Recoiler→ Active support→ separate pressure lever→ coil car
Product Categories : Slitting Line/Cut To Length Line
