High frequency welding pipe production line/welded pipe roll for tube mill
The tube mill is intended for manufacturing of round pipe of Φ76mm-Φ140mm with thickness of 0.8mm–5.0mm from cold-rolled and hot-rolled coil strip by means of unclosed tubular blank with its subsequent welding into tube, edge heating by means of solid state high-frequency welder, longitudinal seam welding in rolls of tube welding machine, cooling, further sizing or shaping and on-stream cutting of endless tube in measured lengths. Finished product will be of round, square or rectangular pipe.
Supported material:
Material: Cold-rolled and hot-rolled coil strip, Carbon steel (δb≤500Mpa, δs≤235Mpa)
2. Steel Tape: Inner diameter: Φ510-610mm
Outer diameter: Max.Φ2000mm
Strip steel width: 240mm-480mm
Strip steel thickness: 0.8 – 5.0mm
The maximum weight: 6.0 tons
| Basic situation of Welded Pipe Machine |
| Working speed: 30-60m/min Capacity: 60000 ton, according to the yearly working days, daily working hours and the products. |
| Electricity |
| Dynamic power | AC280V±10%, 3phases, 60Hz±1.0% |
| Control Power | AC220V±10%, one phase, 60 Hz±1.0% |
| Cooling down system |
| Reservoir for High Frequency equipment | 50 m³, one set |
| Reservoir for circulating cooling water | 30 m³, one set |
| Compressed air |
| Pressure | 0.4Mpa |
| Flow | 4.0m3/h |
| Main elements of welding pipe machine |
| NO. | Item | Quantity |
| 1 | Hydraulic Single-arbor uncoiler with peeler | 1 set |
| 2 | Shearing & butt welding machine | 1 set |
| 3 | Horizontal spiral accumulator | 1 set |
| 4 | Main welded pipe machine | 1 set |
| 5 | Sold high frequency welding system | 1 set |
| 6 | Cooling down system | 1 set |
| 7 | Control Panel system | 1 set |
| 8 | CNC flying friction saw | 1 set |
| 9 | Rollers | 1 set |
| 10 | Pipe package system and runout table | 1 set |
Here are some pictures of the welded tube line for your reference:
Product Categories : Welded Tube Mill > Welded Pipe Machine
