Glazed and C10 Double Layer Double Decker Roll Forming Machine
Brief Introduction:
As to those two layers, they can be glazed-trapezoidal, corrugated-trapezoidal and trapezoidal-trapezoidal. Even to the glazed layer. You can also choose to let it have the step-formed step or not.
We can design the drawings which you like into one set double machine. Comparing to 2 sets single layer machine, it not only saves cost but also space. Normally the thickness of the roof sheet
is 0.3-0.8mm and. But if our customers have their own requests, we can also make the machine as per their requirements.
Usage:
The finished products namely the roof panel can be largely used in factory, workshop, villa, gym, garden and some other public place as roof or wall panel.
Drawings profile:
For the glazed layer:
For the trapezoidal layer:
Working flow:
Main paremeter of glazed and C10 double layer machine.
| No. | Main parameter |
| 1 | Length of the main part | About 8500 х 1650 х 1500 mm |
| 2 | Weight of main part | About 6.5 t |
| 3 | Voltage | 380 V/50 HZ 3 Phase (as customer`s request) |
| 4 | Roller fixer | Middle plate welded |
| 5 | Frame | 350 H steel welded |
| 6 | Frame thickness | 20 mm |
| 7 | Drive mode | Chain |
| 8 | Material of rollers | 45# steel, surface hard chromium plating. |
| 9 | Material of shafts | 45# steel |
| 10 | Diameter of shafts | Φ 80 mm |
| 11 | Number of rollers | Up layer: 13 rollers Down layer: 15 rollers |
| 14 | Main power | 5.5 kw |
Component of glazed and C10 double layer machine
| No. | Name | Unit | Qty |
| 1 | Manual Decoiler | set | 1 |
| 2 | Main forming machine | set | 1 |
| 3 | PLC control system | set | 1 |
| 4 | Hydraulic pump station | set | 1 |
| 5 | Post cut | set | 1 |
| 6 | Electric motor | set | 1 |
| 7 | Output table | set | 1 |
Main pictures of double layer machine
Product Categories : Double Layer Roll Forming Machine
